Start Using Your CEFALY
We’re here to support your treatment success.
Get One-on-One Coaching

Have questions about using your device? Schedule your free call with a Cefaly Coach.

When You’re Ready for a Treatment
Step One
Charge the battery

Before you use your device for the first time, charge the battery. It takes about 4 hours.

  • Plug in your charging dock.
  • Make sure the dock is right side up. The shiny ring with the gold pin should face up.
  • Place your device on top of the dock, with the side that says Cefaly facing up.
  • While charging, the light will blink green. When it’s fully charged, the light will stay green.
Step Two
Clean your skin

Wash your forehead before every session. This helps the electrode stick.

  • Use soap and water to wash between and above your eyebrows. Dry your skin well.
  • Do NOT use makeup remover, lotion cleansers, or alcohol wipes instead of soap and water.
Step Three
Open the electrode

Peel the electrode off the clear plastic. Handle it by the edges.

  • Save the plastic and the bag to store the electrode later.

Before use, check the gel surface. If it is dried out, dirty, or cracked, use a new electrode.

Step Four
Attach the electrode to your forehead

Use a mirror or the Cefaly Start app to help you place the electrode correctly.

  • Place the curved part between your eyebrows. The wings should be about half an inch above your brow ridge (the bony part of your eyebrow).
  • Press it down so it’s flat and sticks well.

If the electrode doesn’t stick well, or if it curls up at the edges, throw it away and get a new one.

Not sure if you’re doing this right? The device will not work correctly if you put the electrode in the wrong place, or if it’s not sticking well. Schedule a Coach call for help.

Step Five
Pair your device with the CEFALY app
Download the app and create an account.
  • Open the app and tap the blue power button on the home screen.
  • Press the button on your Cefaly to wake it. The light will blink dark blue.
  • When the app asks for your PIN, enter the 6-number code below the magnets on the back of your Cefaly. The app will save your PIN.
  • The app will tell you when you’re connected. Your Cefaly will beep and show a solid dark blue light.
Step Six
Attach the Cefaly device

Hold the device by the edge and bring it to your forehead.

  • The magnets on the back of the device will pull it into place.
  • Lie down or lie back while the device is in place. Don’t move around.
Prevent
  • CEFALY will beep 2 times.
  • The light will flash purple. (Purple = Prevent) 

To start Prevent with the button on your Cefaly, press the button 1 time. When you see the aqua light press the button a second time. 

You will see the purple light and hear 2 beeps.

Acute
  • CEFALY will beep 1 time.
  • The light will flash aqua. (Aqua = Acute)

To start Acute with the button on your Cefaly, press the button 1 time.

You will see the aqua light and hear 1 beep.

Step Seven
Pick a program

Use the 20-minute Prevent program daily for migraine prevention. Use the 60-minute Acute program for relief at the first sign of a migraine attack.

Step Eight
Adjust the treatment intensity

CEFALY stimulation should always feel comfortable. You do not need to use CEFALY at maximum intensity to see treatment benefits.

  • The stimulation intensity will get stronger for the first 14 minutes of the session, until it reaches the maximum level.
  • When you definitely notice the feeling, but it still feels OK, press STABILIZE in the app. The stimulation will not get any stronger.
  • You can also press the CEFALY button once to stabilise.
  • If treatment feels too weak, press + in the app.

If treatment feels too strong, press STOP in the app. Or twist the device, then pull it away from your forehead. Then, restart your session.

If your eyebrow or eyelid twitches for 3 minutes or more, the electrode might be in the wrong place. Stop treatment, and try moving the electrode up slightly. Then, restart treatment.

What you should feel:
Tingling 
Prickling
Vibrating
Never any pain or discomfort
Step Nine
End your session

When the session ends, the device will beep and turn off.

  • You might still feel a little tingling for a few minutes.
  • Gently twist the device and pull it away from your forehead.
  • Carefully peel off the electrode at the corners and put it back on the plastic. Store and seal the electrode in the bag.
  • Recharge your CEFALY device so it is ready for the next use.
Cefaly Device Troubleshooting
Electrode Care Essentials

The adhesive electrodes can be reused for multiple Cefaly treatments. To make them last longer: 

Wash and dry your forehead before each treatment session. Use basic soap, not alcohol wipes or facial cleansers.

Apply the electrode to clean, dry skin, without any moisturizers or makeup.

Handle electrodes by the edge, and wash your hands before applying the electrode.

Recline or lie down when attaching Cefaly and during your treatment.

When you remove an electrode after treatment, immediately replace it on the plastic backing, adhesive side down. Then seal it in the electrode pouch.

Get Free Shipping
+ 5% Savings on Electrodes

Sign up for auto-delivery and always have fresh electrodes on hand.